-40%
30X(1.8 Inch SPI TFT ST7735 LCD Serial Port Display Module 128X160 Pixels PCB
30X(1.8 Inch SPI TFT ST7735 LCD Serial Port Display Module 128X160 Pixels PCB
30X(1.8 Inch SPI TFT ST7735 LCD Serial Port Display Module 128X160 Pixels PCB
30X(1.8 Inch SPI TFT ST7735 LCD Serial Port Display Module 128X160 Pixels PCB
30X(1.8 Inch SPI TFT ST7735 LCD Serial Port Display Module 128X160 Pixels PCB
30X(1.8 Inch SPI TFT ST7735 LCD Serial Port Display Module 128X160 Pixels PCB

30X(1.8 Inch SPI TFT ST7735 LCD Serial Port Display Module 128X160 Pixels PCB

$ 89.53

Availability: 15 in stock
  • Restocking Fee: No
  • Modified Item: No
  • Refund will be given as: Money Back
  • Brand: Unbrand
  • Marke: SODIAL
  • Custom Bundle: No
  • Modification Description: No
  • MPN: Does Not Apply
  • Return shipping will be paid by: Buyer
  • Resolution: Regular
  • Country/Region of Manufacture: China
  • California Prop 65 Warning: No
  • Condition: New
  • Item must be returned within: 30 Days
  • Display Mode: Regular
  • All returns accepted: Returns Accepted
  • Bundle Description: No
  • Hersteller: SODIAL

    Description

    30X(1.8 Inch SPI TFT ST7735 LCD Serial Port Display Module 128X160 Pixels PCB
    30X(Large resolution of 128x160 pixels for clear display of texts, image and pictures.
    Via the 1.8-inch TFT display you can leave the computer off and get the data directly from your micro-controller as well as the SD card reader on the back of the board.
    Bright, anti-reflective TFT display with large 1.8-inch diagonal screen and integrated SD card reader. Its large resolution of 128x160 pixels gives a clear presentation of text, image, and images.
    With a 1.8-inch diagonal screen and 128x160 pixel resolution, the matte surface and luminous but efficient back-light (max. approx. 50 mA) also allows for use in bright lit environments.
    Pins required for SD card reader ( included)
    IO for the most streamlined wi: (At least 3 IOs are required)
    1.RST-directly connected to the reset signal terminal of the microcontroller, this IO can be saved
    2.CS-connect to low level, the chip select is valid for a long time, this IO can be saved
    3.AO-Connect IO control register selection
    4.SDA-Connect IO to control data transmission
    5.CLK-Connect IO to control SPI bus
    6.LED-connect the high-level chip with 3.3V backlight and the IO can be saved
    IO used for standard wi: (6 IO)
    1.RST-Connect IO to control LCD reset
    2.CS-Connect IO control chip selection
    3.AO-Connect IO control register selection
    4.SDA-Connect IO to control data transmission
    5.CLK-Connect IO to control SPI bus
    6.LED-connect IO to control backlight on and off or PWM to control brightness
    size:57.8x34x7.5mm
    Material:PCB
    colour:Black+red
    Package Contents:
    1 * 1.8 inch SPI TFT Display Module)